Shipping Address: 717 Botkins Lane, Frankfort, KY 40601
Phone: (502)226-1230 E-Mail: yoda1911@hughes.net
Hours of operation: 10 a.m. to 6 p.m. EST Monday through Friday
Shipping Address: 717 Botkins Lane, Frankfort, KY 40601
Phone: (502)226-1230 E-Mail: yoda1911@hughes.net
Hours of operation: 10 a.m. to 6 p.m. EST Monday through Friday
1911 Services
Prices are for labor only. Please keep in mind that this is a full custom shop and these prices are for our most basic services. We work closely with customers to build dream guns and we are not restricted by this list.
Action Job
| Match Trigger Installation | $35.00 |
| Trigger Pull Weight - 4lbs | $115.00 |
Most action jobs with a pull weight of 3.5 to 4 lbs. can be properly achieved on "box stock" pistols without the purchase of replacements parts. Gemini Customs may recommend replacement of certain components to ensure the customer receives an action set up to meet their individual needs. Gemini Customs reserves the right to turn down customer requests for action jobs that will not meet safety and reliability minimums.
Accuracy & Reliability Work
| Non Ramped Barrel Installation | $225.00 |
| Ramped Barrel Installation** | $295.00 |
| Throat Barrel and Polish Feed Ramp* Flute Bull Barrels 6 x .250 x .030 Flute Barrel hoods 6 x .125 x .020 |
$45.00 $125.00 $45.00 |
| Lower Ejection Port** | $50.00 |
| Full Length Guide Rod Reverse Plug | $50.00 |
| Reverse Plug "Acculock" Supported Type | $85.00 |
| Polish and Adjust Extractor | $40.00 |
| Replace Ejector with Extended Type | $25.00 |
| Match Bushing Installation* | $35.00 |
| Fit Hybrid Barrels | Ramped $375.00 Non-Ramped $340.00 |
| Tighten Frame to Slide Fit** | $150.00 |
| Fair Back Ejection Port** | $40.00 |
(*included in barrel installation, ** pistol will require refinishing)
Ergonomic & Function Enhancement
Most function and ergonomic
enhancements will require refinishing of the pistol. Please consult with
us for guidance on the finish that will best suit your particular requirements.
| S&A Magwell Blend and Installation | $150.00 |
| Cocking Serrations/Front Slide Snakeskin Cocking Serrations (on bare slides only) Dragonskin Cocking Serrations (on bare slides only) Diamondback Cocking Serrations (on bare slides only) |
$80.00 $125.00 per side $125.00 per side $150.00 per side |
| Single Side Thumb Safety Installation | $60.00 |
| Front Strap Checkering: 20LPI,25 LPI,30 LPI, or Golfball includes hi-cut re-radiused grip |
$ 325.00 |
| Ambidextrous Thumb Safety | $95.00 |
| Wilson Beavertail Grip Safety Installation | $110.00** |
| Brown Beavertail Grip Safety Installation | $110.00** |
| Serrate Heel of Slide Fast back slide treatment with serrations Fast back slide treatment with snakeskin scales |
$65.00 $ 150.00 $ 175.00 |
| Snakeskin, Fishscale or Scallop Front-Strap Treatments | $300.00 |
| Diamondback Front-Strap Treatment | $375.00 |
| Dragonskin Front-Strap Treatment | $350.00 |
| Flat top slide with serrations 30 or 40 LPI | $175.00 |
| Flat top slide with Snakeskin | $225.00 |
| Flat top slide with Diamondback | $250.00 |
| Bobtail Conversion (machine work only) | $175.00 |
| De-Horn & Bevel Carry Package** | $225.00 |
(*included in barrel installation, ** pistol will require refinishing)
Refinishing
Due to differences in the amount of
surface preparation required to achieve distinct results in grade or appearance, refinish prices apply to the actual cost of plating, re-bluing, or
application of polymer type finishes.
Service, Tactical and Master grade finish preparation will vary according to condition of pistol and customer requirements and will be prices accordingly.
Any combination of finishes can be utilized for customer preference. Customer request options will be priced at time of request.
| Hard Chrome Entire Pistol (shipping not included) | $300.00 |
| Hard Chrome Magazines | $15.00 ea. |
| Polymer Finish Entire Pistol (shipping not included) | $275.00 |
| Polymer Finish Magazines | $15.00 ea. |
Sight Work
(other sights and sight cuts are available upon request)
| Bo-Mar low mount rear sight (meltdown | $125.00 |
| Heinie Rear Cut | $65.00 |
| Hienie Rear Meltdown | $175.00 |
| Heinie Front Cut | $35.00 |
| Novak Rear Cut | $60.00 |
| Novak Front Cut | $35.00 |
| Wilson Front Cut | $35.00 |
Minimum Charge Explanation
A minimum labor charge will be applied
for the replacement of broken, damaged or worn parts (recoil spring, sear spring, plunger tube, etc) found during the maintenance or
customizing of the pistol.
Test Fire Charge
All pistols must be test fired before
they are returned to the customer. Gemini Customs LLC will supply the
ammunition with the test firing charge. Ammunition is FMJRN. If you
require ammunition of a specific type, there will be an additional charge for
any difference in cost.
| Test Firing Charge | $ 55.00 |
(*includes complete preventive maintenance
inspection of all parts and assemblies and test firing. Does not include the cost of any required replacement parts)
Bobtail™ Conversions
Click to enlarge thumbnails
We are now offering
Bobtail
™
conversions for the
unbelievable price of $145.00 (machine work and hand-fitting only). This does not include
replacement Bobtail mainspring housing.
This is a very practical and attractive ergonomic enhancement for any 1911
pistol. If you can't afford, but always wanted, a bobtail 1911,
here's your chance to take your existing pistol and transform it at a
great price. What a deal!
Checkering - 20, 25, 30 LPI
Click
to enlarge thumbnail
We are currently offering 20, 25, 30 LPI checkering, Fishscale, and Snakeskin checkering. This includes hi-cut and re-radiused front-strap treatments. You can pay more, and get less, but why? Take advantage of this value priced ergonomic enhancement, one of the best in the industry!
Dragonskin, Fishscale, Snakeskin
Welded-on Magwells
A welded-on magwell funnel and front-strap checkering have always been recognized as the epitomy of a full custom 1911. Trouble is, it has always been too expensive for most people to afford and hard to find a pistolsmith that even offers it. Not Anymore! Through a cooperative effort with Scott Mulkerin of SDM Fabricating and Gemini Customs, we can now offer you one of the most beautiful and ergonomically correct enhancements to your 1911 for the value price of $300.00, not including parts. This is available for Carbon Steel guns and Stainless Steel guns. If you've ever wanted it, now is the time.
Heine Rear Sight "Melt Down" Treatment
Nobody does Heine rear sights as smooth as we do! Can we do one for you? Machine work and meltdown $175.
Serrated Flat Top Slides
Click on the above boxes for a full blown photo, thumbnails are not working. We apologize for any inconvenience and we are currently trying to fix the problem.
Copyright 2010, Gemini Customs, LLC.
All rights reserved.